Unique algorithm that enhances natural character & colouration.
Add reverb that sounds completely tight when used on low sources like kick-drum, toms, basses & synths.
Without metallic cluttering, you retain the clarity and presence of you lead instruments.
Create a wide stereo reverb from a mono source without any phase issues.
Built-in Shimmer, Detune & Internal Ducker.
Sounds so balanced you can use it on your whole track during mastering.
Used on a bus, you can combine the Perfect Room with all kinds of effects to create character and excitement.
3 different tails shapes and 5 room types.
How would your music sound in a perfect room?
How would your music sound in a perfect room?SHOW LESS
INPUT AND OUTPUT (-48dB to 48dB): Input and output gain that let you boost or attenuate the signal going in and going out, giving you more control over the signal. MIX (0% to 100%): Smoothly mixes in the wet reverb signal giving you control over the overall intensity of the effect. HPF AND LPF (20Hz to 20kHz): A high pass and low pass filter to apply additional filtering to the generated noise. DELAY (0ms to 1000ms) Adds pre-delay to the wet reverb signal, to preserve clarity and transients. TAIL (0ms to 5000ms) Controls the length of the reverb tail. WIDTH (0% to 100%) Lets you adjust the stereo width of the wet reverb signal. CURVE (NATURAL / TRIANGLE / SQUARE): Lets you choose between different tail decay shapes. TYPE (BRIGHT XL / BRIGHT / FLAT / DARK / DARK XL): Lets you choose between different room colors. FLIP (ON / OFF): Reverses the reverb tail. SPLIT (ON / OFF): Creates a stereo reverb from a mono source. SHIMMER (0% to 100%) Smoothly mixes in the shimmer effect. SOURCE (0% to 100%) Controls the mix amount of the original reverb signal. LO OCTAVE (0% to 100%) Controls the mix amount of the reverb signal copy pitched down one octave down. HIGH OCTAVE (0% to 100%)Controls the mix amount of the reverb signal copy pitched up one octave down. DETUNE (0% to 100%) Smoothly mixes in the detune effect. WOW (0% to 100%) Lets you slowly detune the wet reverb signal in a pseudo-random manner. SHAKE (0% to 100%) Lets you quickly detune the wet reverb signal in a pseudo-random manner. SPEED (0% to 100%): Lets you control the speed of the wow and shake features. DUCKER (0% to 100%): Smoothly mixes in the ducker effect. THRESHOLD (-48dB to 0db): Sets the threshold above where the ducking kicks in. RATIO (1 to 10): Sets the compression ratio used by the ducker. ATTACK (0ms to 1000ms): The attack feature fades in the gain reduction generated by the ducker. HOLD (0ms to 100ms): The hold feature stabilises the gain reduction generated by the ducker. RELEASE (0ms to 5000ms): The release feature fades out the gain reduction generated by the ducker. LATENCY: To utilise the TXVerb technology the Perfect room has 4096 samples latency. The plug-in reports this latency to the DAW, so the DAW can compensate for it if you enable the DAW's 'delay compensation' functionality. This means that in any professional DAW, you don not have to worry about latency at all during the mixing mastering stage of your productions. However, in general DAW delay compensation does not work when recording. This means that the Perfect Room reverb plugin will have some latency during the recording stage, just like any other plugin that reports latency to the DAW.